With the development of productivity, the shortage of labor force and the continuous improvement of maintenance standards, high-quality garden machinery will dominate the market. According to the current maintenance operation mode, it will not be able to meet the requirements of the society. Tools and operating techniques must be used. Has improved.
1. Small garden machinery will become more and more popular and will completely replace manual operations. All kinds of light and fast small garden machinery will become more and more popular among the public. It is only a question of time to replace manual tools, and its role will become more and more obvious. For example, hedge trimmers replace flat shears, oil yards replace hand grips, and digging machines replace shovels. In the future, small garden machinery will become more and more portable and its functions will be more complete.
2. The role of multifunctional garden machinery is promising. In view of the characteristics of landscaping maintenance, garden machinery with powerful functions, convenient operation, and capable of completing a variety of work projects will play a huge role in landscaping maintenance, and its development prospects are promising.
The chain saw is a two-stroke power, you should pay attention to power, cutting tools, etc., to ensure the normal use of the machine:
One, engineThe engine is a two-stroke engine, and the fuel used is a mixture of gasoline and engine oil. Before the machine is working, run it at low speed for a few minutes, and watch the lubricating chain oil to form an oil line before working. When the machine is working, use the throttle at high speed. After each tank of oil work, you should rest for 10 minutes, and clean the loose gaskets of the machine after each work to ensure heat dissipation.
Second, the tool partWhen using the new machine, pay attention to the tightness of the saw chain so that it can push the saw chain to rotate. It is advisable to use a hand-held saw chain with the guide teeth parallel to the guide plate. After a few minutes of use, pay attention to tensioning the saw chain again.
Three, use safetyBefore operation, no people or animals are allowed to move within 20 meters. Be sure to check whether there are angle irons, stones and other debris on the grass, and remove the debris on the grass.
Four, storageWhen storing, you must clean the body, drain the mixed fuel, and burn the fuel in the carburetor; remove the spark plug, add 1-2ml of two-stroke engine oil to the cylinder, pull the starter 2-3 times, and install the spark plug.
In addition, it is forbidden to increase the oil when the new machine is tested, and it needs to be idle for a period of time for the cylinder and piston to run-in before it can work.