News
Home / News
1. Before using the hedge trimmer, please read the instruction manual carefully to clarify the performance of the machine and the precautions for use.2. The purpose of the hedge trimmer is to trim hedges and shrubs. In order to avoid accidents, please do not use it for other purposes.3. The hedge tr...
Read More
There are two types of lawn mowers: side-mounted and backpack-mounted: the side-mounted brush cutter adopts a hard shaft drive, which is mainly composed of an engine, a transmission system, a clutch, working parts, a control device, and a side-mounted belt. One end of the drive shaft is equipped wit...
Read More
① Protective measures. Operators should wear hard protective shoes, tight-fitting work clothes, and protective glasses to prevent debris and other debris splashing during mowing from hurting their bodies.② Check whether the blade is damaged, and the tightening of nuts and bolts to ensure safety.③ Ch...
Read More
1. Before using the chain saw, you must read the manual carefully and operate in strict accordance with the requirements of the manual to ensure the safety and longevity of the product 2. Pay attention to the tightness of the guide chain during the installation process (pull up the chain with your ...
Read More
1. Can't start in springAfter winter, if poor maintenance fails to start in spring, the reasons and countermeasures are as follows(1) It may be that the first year's oil in the fuel tank has not been exhausted, so check whether the fuel is qualified fresh oil;(2) Its function is to discharge the pul...
Read More
Fault handling1. Severe vibrationThere may be several reasons for this phenomenon:(1) The blade is bent or worn out of dynamic balance;(2) The crankshaft is bent due to impact;(3) The coupler is damaged, causing the blade and the crankshaft to rotate relative to each other, causing imbalance;(4) Th...
Read More
1.1 Check whether the safety device is firm, whether the screws and nuts of each part are loose, and whether the fuel leaks. Especially whether the installation screws of the blades and the screws of the gear box are tight, if they are loose, they should be tightened.1.2 Check whether there are wire...
Read More
1. The fuel for the four-stroke gasoline engine is clean gasoline (above No. 90), and the lubricating oil is SAE30 four-stroke engine oil. The new machine has been idle for 2 hours and can be used normally after the engine is warmed up and the oil is changed. In normal use, the oil should be changed...
Read More
Garden machinery refers to chain saws, edge cutters, trimmers, hedge trimmers, brush cutters, lawn mowers, twigs, leaf suction machines, lawn mowers, lawn trimmers, etc. for landscaping, garden construction, gardens Maintenance of mechanical equipment.Garden machinery is a collective term. Actually,...
Read More
In garden maintenance, it is important to choose a tool of high quality, but if the user cannot master the correct use methods and skills, no matter how good the tool is, it is difficult to complete the maintenance task with quality and quantity. Everyone knows that pruning, tree felling and other o...
Read More
1 Check before operation1.1 Check whether the safety device is firm, whether the screws and nuts of each part are loose, and whether the fuel leaks. Especially whether the installation screws of the blades and the screws of the gear box are tight, if they are loose, they should be tightened.1.2 Che...
Read More
The brush cutter is a two-stroke power, and attention should be paid to power, transmission and cutting tools during use to ensure the normal use of the machine.1. EngineThe engine is a two-stroke engine, and the fuel used is a mixture of gasoline and engine oil. The ratio of the mixed oil is: two-s...
Read More