Lawn mower is one of the most commonly used garden machinery in landscaping, and it is also the most frequently used equipment in lawn management. Therefore, how to properly use lawn trimmers is very important. 1. Preparations before starting 1. Check the engine oil. When checking the engine oil, ...
Read More
Brush cutters can be divided into two types: side-mounted and back-mounted. The hook on the backrest belt of the side-mounted brush cutter is hung on the side of the operator, and the machine is operated by holding the handle with both hands. The crankshaft of the engine of this brush cutter is loc...
Read More
With the development of the times, people’s awareness of environmental protection has increased, and the use of lawn mowers has become more and more widespread, but there are also many people who do not understand the use and maintenance methods of lawn mowers, so let’s introduce to you: Instructio...
Read More
1. The fuel used in the engine of the hedge trimmer is a mixture of motor oil and gasoline, which is flammable. Please do not refuel or store fuel in incinerators, burners, stoves and other places that may catch fire.2. Do not smoke while working or refueling.3. If there is no fuel during use, you m...
Read More.png)
1. Before using the hedge trimmer, please read the instruction manual carefully to clarify the performance of the machine and the precautions for use.2. The purpose of the hedge trimmer is to trim hedges and shrubs. In order to avoid accidents, please do not use it for other purposes.3. The hedge tr...
Read More.png)
There are two types of lawn mowers: side-mounted and backpack-mounted: the side-mounted brush cutter adopts a hard shaft drive, which is mainly composed of an engine, a transmission system, a clutch, working parts, a control device, and a side-mounted belt. One end of the drive shaft is equipped wit...
Read More.png)
① Protective measures. Operators should wear hard protective shoes, tight-fitting work clothes, and protective glasses to prevent debris and other debris splashing during mowing from hurting their bodies.② Check whether the blade is damaged, and the tightening of nuts and bolts to ensure safety.③ Ch...
Read More
1. Before using the chain saw, you must read the manual carefully and operate in strict accordance with the requirements of the manual to ensure the safety and longevity of the product 2. Pay attention to the tightness of the guide chain during the installation process (pull up the chain with your ...
Read More
1. Can't start in springAfter winter, if poor maintenance fails to start in spring, the reasons and countermeasures are as follows(1) It may be that the first year's oil in the fuel tank has not been exhausted, so check whether the fuel is qualified fresh oil;(2) Its function is to discharge the pul...
Read More
Fault handling1. Severe vibrationThere may be several reasons for this phenomenon:(1) The blade is bent or worn out of dynamic balance;(2) The crankshaft is bent due to impact;(3) The coupler is damaged, causing the blade and the crankshaft to rotate relative to each other, causing imbalance;(4) Th...
Read More
1.1 Check whether the safety device is firm, whether the screws and nuts of each part are loose, and whether the fuel leaks. Especially whether the installation screws of the blades and the screws of the gear box are tight, if they are loose, they should be tightened.1.2 Check whether there are wire...
Read More
1. The fuel for the four-stroke gasoline engine is clean gasoline (above No. 90), and the lubricating oil is SAE30 four-stroke engine oil. The new machine has been idle for 2 hours and can be used normally after the engine is warmed up and the oil is changed. In normal use, the oil should be changed...
Read More
English
Español
